Homelab Power
-
Off Grid Solar Homelab Design Manual: 7 Steps in Order
Seven steps in order for an off-grid solar homelab: meter the load, choose DC or AC, set autonomy, size LiFePO4 and panels, then automate shutdown.
-
LiFePO4 Battery Bank Sizing: How Many kWh a Homelab Needs
Size a LiFePO4 bank from measured daily watt-hours, days of autonomy, 80% depth of discharge and inverter losses, with a worked 60 W homelab example.
-
Split-Phase Inverter for an Off-Grid Homelab
This guide explains when an off-grid homelab needs a split-phase inverter, compares three 120/240 V options, and covers idle draw and panel wiring.
-
MPPT vs PWM Charge Controllers for Homelab Solar
How MPPT and PWM controllers differ for continuous loads: harvest, array voltage limits, LiFePO4 charge profiles, wiring freedom, and when PWM still fits.
-
LiFePO4 Solar Battery Not Charging? Diagnose It
Diagnose a LiFePO4 solar battery that will not charge: check BMS cutoffs, controller settings, PV faults, fuses, wiring and voltage drop in order.
-
Solar Panels for a Homelab: How Many Do You Need?
Working out array wattage for a 24/7 homelab: daily energy first, then worst-month peak sun hours, derate factors, and why the answer is a range.
-
Sizing an Off-Grid Solar System for Always-On Homelab Loads
How to size solar for continuous 24/7 equipment: start from the measured load, then the battery bank, then the array, charge controller and inverter.