charge-controllers
MPPT vs PWM Charge Controllers for Homelab Solar
How MPPT and PWM controllers differ for continuous loads: harvest, array voltage limits, LiFePO4 charge profi…
Solar Homelabs — Off-Grid Solar Homelabs, LiFePO4 Battery Storage & Split-Phase Inverter Loads
Off-Grid Solar Homelabs, LiFePO4 Battery Storage & Split-Phase Inverter Loads
Solar Homelabs
Independent · 2026
Independent · 2026
Featured power-systems
Split-Phase Inverter for an Off-Grid Homelab
This guide explains when an off-grid homelab needs a split-phase inverter, compares three 120/240 V options, and covers idle draw and panel wiring.
Read the article →Latest guides
troubleshooting
LiFePO4 Solar Battery Not Charging? Diagnose It
Diagnose a LiFePO4 solar battery that will not charge: check BMS cutoffs, controller settings, PV faults, fus…
array-design
Solar Panels for a Homelab: How Many Do You Need?
Working out array wattage for a 24/7 homelab: daily energy first, then worst-month peak sun hours, derate fac…
power-systems
Sizing an Off-Grid Solar System for Always-On Homelab Loads
How to size solar for continuous 24/7 equipment: start from the measured load, then the battery bank, then th…